Care Instructions

DO NOT CLEAN THE FILM FOR 30 DAYS AFTER INSTALLTION

Film Dry Out Time

  • The mounting solution used during the installation of your window
    tint will require a dry-out time. Cold or non-sunny weather conditions can
    lengthen the dry-out time, while warm weather and direct sun light exposure
    will shorten the dry-out time. Small water beads and a slightly cloudy look
    may appear during the dry-out time. If slow drying does occur, do not          
    become alarmed. The film will dry-out.

 

Cleaning Instructions

  • Always use clean, soft materials to wash and dry your window film surfaces.
  • Most glass cleaners will work, although a good cleaning solution for window film is liquid dish soap added to fresh water. Avoid window cleaners containing ammonia.
  • A soft cloth or a clean synthetic sponge is recommended for washing the window film, followed by another clean soft cloth or soft rubber squeegee for drying.
  • To avoid scratching the film, do not use bristle brushes, abrasive scrubbing sponges, or any cleaning materials that may have been contaminated with dirt particles.
  • Avoid washing interior and exterior windows with the same cleaning materials.

 

Some brands of paper towels are coarse enough to put fine scratches in the film, even films with scratch resistant, protective hard-coat finish. While these scratches may be too fine to be seen at first, they can cause damage and reduce the polished look of the film over time.

Contact us today for a free tinting quote

Contact Us